NPT cable gland and PG threaded cable glands buying advices? Our watertight fittings for the rail sector – the WADI-BN fittings – are for the entry of electric cables inside railway compartments and between carriages, in air-conditioning systems, in traction motor engineering and in signal boxes. As in all industries, the WADI-BN must also meet extensive safety standards in order, for instance, to prevent cable fires. The most important of these are the requirements of the global players in the train industry, stipulated in the DIN EN 45545 and NF F 16-601 standards, among others.
Cable glands are bulkhead modules that allow barrier penetration while providing sealing protection. They are commonly known as sealing glands or strain reliefs and have the ability to seal around one or multiple wires, cables, or probes. Cable glands are sometimes configurable to work with any cable within a specified size range. They serve several functions including environmental protection (such as protection against dust and moisture) and additional sealing on the part of the cable entering the enclosure.
Bimed plastic cable glands provide corrosion-resistant sealed cable entry and strain relief into enclosures or electrical equipment. IP68-rated and available in light gray or black, the Standard series offers Panzergewinde (PG) Thread sizes from PG7 to PG48; Protection series glands are available in sizes from PG7 to PG21, and include a strain relief coil. Common applications for cable glands include aerospace, cleanroom, fire protection, industrial, marine, panel or enclosure, power or utility, railway, and telecommunications. Aerospace cable glands: Designed and rated for use on aircraft or space vehicles and/or equipment; may include applicable approvals for military and/or aircraft use. Read more info at PG Threaded Cable Gland.
The CMP E1FX/M cable gland is suitable for use with all forms of equipment protection permitted in Zone 1 provided always that the prevailing code of practice, installation and maintenance is observed ie. IEC60079-14. Locate the cable gland Armour Cone ensuring the correct side of the cone is outermost – grooved for braid/tape armour and stepped for SWA cables. Pass the cable through the cable gland until the wire armour is engaged with the cone. Spread the wire armour evenly around the cone.
What is a Barrier Gland? Barrier glands are similar to normal glands, except a compound sealant material is used to ensure the inside of the cable is gas tight as well as the outside. When Should a Barrier Gland be Used? BS EN60079-14 Electrical Apparatus for Explosive Gas Atmospheres Part 14 – Electrical Installations in Hazardous Areas (other than Mines) provides a selection process for deciding if a barrier gland is required. There are various options to consider, however if the hazardous gas require IIC apparatus, or if the volume of the enclosure is greater than 2 litres then it is likely you will need to use a barrier gland. IIC apparatus is generally associated with Hydrogen.
CableGlandsOnline.com is a leading manufacturer of cable glands located in Mongkok, Kowloon, Hong Kong. Because of our good production management and large volume we are able to sell you the best cable glands at competitive prices. CableGlandsOnline.com is your cable glands online warehouse, just a click away. Source: https://cableglandsonline.com/.