Synthetic blood penetration test equipment factory China? Mask Testing Machine Synthetic Blood Penetration Tester, Bacterial Filtration Efficiency Test Equipment, Particulate Filtration Efficiency Tester, Masks Leakage Tester In stock, fast delivery, Consult us now! Mask testing equipment produced by GESTER is very popular in the market.Protective Clothing Tester and Mask Tester, manufactured based on high-quality materials and advanced technology, has reasonable structure, excellent performance, stable quality, and long-lasting durability. It is a reliable product which is widely recognized in the market.Adhering to the service concept to be customer-oriented and service-oriented, GESTER is ready to provide our clients with quality products and professional services. Discover more details on synthetic blood penetration tester.
The AC servo drive system with low noise and wide range of applications. Pneumatic Bursting Strength Tester Test Methods: Constant Time Bursting. The tester bring saving and printing functions and support on-line operation. Provide on-line interfaces, professional detection software which can be used to analysis testing result. Summary of Test Method: A specimen is clamped over an expandable diaphragm. The diaphragm is expanded by fluid pressure to the point of specimen rupture. The difference between the total pressure required to rupture the specimen and the pressure required to inflate the diaphragm is reported as the bursting strength.
Correct use of computerized universal testing machine: It is strictly forbidden to use the Computerized Universal Tensile Strength Testing Machine price for overload and super speed. It is strictly forbidden to hit the lifting screw with hard objects and put on the lubricating oil on time. When mechanically replacing the V-belt, pay attention to the position of the hand to prevent pinching the finger. The transmission part must be covered with a protective cover.
ASTM D4060 Taber Abrasion Tester Uses and Factors to Be Considered: Taber Abrasion is used for measuring the wear resistance of organic coatings applied flat, rigid test samples. ASTM D1044 is used for transparent plastic materials to evaluate their capacity to maintain their optical properties, upon typical, wear to be expected while in service. Abrasion resistance to Taber Abrasion is usually measured as a weight or a coating thickness loss after a given number of cycles. Each arm, by default, is loaded to apply a 250 g. pressure on each wheel. Depending on the product/specification used, this weight can be increased to 500g or 1000g. The abrading wheels are available in different grit for a more or less abrasive action.
Assessment Records: At the end of all tests, flush the samples twice with distilled water at 40℃, and then dry the samples in air not exceeding 60℃. After drying, assess the change in color of the sample and the stain of multi-fiber adjacent fabric under the color light box, and record the data sheet according to the requirements. Wash fastness is the most common test item for clothing textiles, which and crocking color fastness test are the two tests that are most prone to problems in textile materials. If you want to know more about the textile colour fastness test, please pay attention to Gester instruments. Find even more information at https://www.gesterinstruments.com/.