Car MOT testing verification and mobile mechanic Reading near me: An MOT certificate confirms at the time of the test your car met the minimum road safety and environmental standards required by law. It doesn’t mean your car will remain roadworthy for the following 12 months. You still need to make sure you maintain your car well, including regular servicing. Make sure you’re not caught out by any of the five simple reasons for a fail shown above, then inspect your car against our 11-point checklist below. If you find any problems in the following areas, you can fix some yourself to help keep garage costs down. Searching for Mot And Service Reading or other MOT verification services? Pre-MOT checks you can do yourself – A vehicle can fail an MOT test for a number of reasons, a wide range of tests are carried out across all areas of the vehicle and it only has to fail in one of these areas to fail the whole MOT. It’s a good idea to prepare a checklist a few weeks before your MOT to make sure that your car is in the best possible condition by the time it is inspected. Many of the most common reasons for MOT testing failure are areas that can easily be checked at home. So, by assessing these in advance, you can fix any issues and increase the chance of passing your MOT.
Keeping your car’s belts and hoses in good shape can help keep your car running and may help you avoid a breakdown on the road. For example, if your serpentine belt breaks while you’re driving, it may cause many of your car’s systems to fail. Having your belts and hoses checked at every oil change will help ensure that they’re in good condition and don’t need replacing. Review your car insurance: Just like regular car checkups, it’s a good idea to review your car insurance policy from time to time. This can help ensure your policy’s coverages, limits and deductibles are up-to-date and suitable for your current situation.
Checking the tires before hitting the road is always a good practice. And this practice can prove to be helpful during the summer months too. Visually inspect if your tire threads are showing signs of wear or not. It is dangerous to drive with worn tires as those can lead to uneven handling of your car both during driving and while using the brake. And they may also blow out if not replaced timely. Next, it’s time to examine tire pressure. Depending on the build and type of your tire, the pressure should be between 30 and 35 PSI. Make sure that the tires are not over or under-inflated, as those may lead to a flat tire on hot days. Don’t forget to do the same with the spare tire as well. Do check out these top tips on how to inspect your tires before getting started.
Decide between the independent corner garage and the dealership service department. Technicians at the dealer are specialists; they are manufacturer-trained and typically work exclusively on your make of vehicle. Most dealers have an ongoing training program for the service staff, which includes not only the service technicians but also the service manager, advisors and support staff. (See “Roles of the Dealership Service Staff…Who Does What”.) But the dealer service department is usually the most expensive route. And it doesn’t mean that the dealers always have the best technicians. Many independent auto repair service facilities are started by previous dealer employees who want to operate their own repair store. For help deciding which is right for you, see “Corner Garage vs. Dealer Service Department.”
Not every chip or crack on a windscreen will cost you an MoT certificate, as it’s all down to location. The details may seem complicated, but as a rule of thumb you can get away with chips smaller than 10mm in front of the driver. Any damage bigger than 10mm in front of the driver – and also in the glass area swept by the wipers – will be an MoT fail. Elsewhere on the glass, damage has to be larger than 40mm to constitute an MoT fail. Wiper blades must be in good condition – not perished or damaged – and clear the screen effectively. The washers must work too, and the MoT tester is within their rights to issue a fail if you haven’t topped up the washer bottle or unblocked dirty washer jets with a pin!
When you come to sell the car, having a full service history will make it more appealing and boost its second-hand value, and if your car is written off, an insurer is likely to pay out more for a car with a full service history. Don’t forget to take your car’s service booklet (often found in the same pouch as the handbook) to the garage or dealership, so they can stamp and date when the service was carried out. A growing number of cars come with no service record or handbook, but the servicing agent should be able to log into the car maker’s online portal and add in information about the service that has been done. See extra details on http://www.mot-centre.com/.
Cars are becoming ever more sophisticated. Unfortunately, this also means that there are more electronic components that could fail. Have you ever taken your car to a garage with a warning light on, only to find they can’t locate the problem? We use the latest diagnostic equipment to find the fault, and then we repair it. From ABS and airbag sensors, to engine management lights and air conditioning, we’re here to help you.
Most car owners underestimate how important car battery maintenance is. Although your battery will run out of juice eventually, keeping up with it will extend the life. If you want your car battery to run smoothly, you need to make sure it has a good connection. Residue can build up and prevent your tire from starting. You can get battery-cleaning fluid at most auto parts stores. Removing the battery and cleaning the connections will extend the life and improve the connection.
Headlights and indicators: front, rear, headlights (main beam and dipped), hazard lights and indicators. If any aren’t working, first check for broken bulbs and replace them. Brake lights: ask another person to check the rear brake lights come on when you press the brake pedal. Tyres: check all the tyres have at least the minimum legal tread depth of 1.6mm, or they’ll be marked as an MOT ‘fail’. This can easily be done with a 20p coin – see the diagram at Tyre Safe. The interior of your car will be checked as part of the MOT test. The seat belts; All seats within your vehicle must have seatbelts and all seatbelts must be in the correct working order. The type, condition and security of the seatbelts will also be checked.