Car polisher product supplier in China: We have very strict procedure to control the quality and production of each product. Our engineer and QC is working in our factory for more than 10 years. They have full experience on product. The raw material are chosen from more than 10-20 potential suppliers.The qualified supplier must be approved by documents, license, actual working place checking approved supplier. Ensure to keep the orders consistently for customer. Company’s product have passed UL, GS, CE and EMC and other international certification. Is a machine polisher worth it? Of course it’s worth it, scratches on the car will reduce the value of the car. Regular polishing can remove surface scratches, make the car smoother than before, and extend the life of the paint. See many more details at Tekway.
How to Use a Polishing Machine for Car Polishing? Car polishing is the removal of paint defects, swirl marks, oxidation and other minor blemishes, from the type of polisher, paint surface, operating technique, segmented work, polishing pad selection, and small area testing are all factors when using a polisher. How to tell if the car paint needs waxing? Use a high-quality automotive wax or paint sealant to create a protective barrier over the paint surface. This will help prevent oxidation, UV damage and fading. Follow the manufacturer’s instructions on how often to apply and reapply.
Let’s first understand the principle of polishing machine: The principle of polishing is to eliminate the oxide layer on the car body paint surface through static electricity, friction, polishing and other methods, thereby improving the brightness of the car body paint surface. Use a sander when polishing. Under the action of the polishing disc, the polishing machine reacts with the car paint to generate static electricity. At the same time, the heat of the car body softens the paint film and enlarges the pores. In this case, static electricity will suck out the dirt in the pores on the paint surface. The polishing disc will grind away the oxide layer on the paint surface and flatten and fill the small scratches. At the same time, some components of the polishing agent will be added to the paint. In order to reduce changes in the film, polishing treatment can improve the paint surface defects and make the paint surface smooth and bright.
Backing plate is a support accessories for polishing machine,the wool pad and foam pad need it to attached on.according to the different material,there’s rubber backing plate,EVA backing plate,fiberglass backing plate.there’s also have different type fits rotoary polisher and dual action polisher. Tekway sander paper have a range of different grit sizes and shape .Tekway sander paper also have Perforated or non-porous sandpaper,you can choose them according to your requirment. Sander paper is round and is perforated, it is mainly used for electric sander or air sander to polish the scratches and perforated sander paper can discharge the dust so that the dust can not block up the motor ,when operating. Tekway Sqaure sander paper mainly used by hand to polish some small parts, for example ,stainless steel nails or the other small metal pieces. At the same time ,the tekway sander paper also have different color and usual sanding color are black sanding ,red sanding ,green sanding and bule sanding. See even more details at https://www.techwaycarcare.com/.
Moderate Pressure: When polishing, moderate pressure is key. Too much pressure may cause excessive wear on the paint, while too little pressure may not effectively remove scratches. Always maintain moderate pressure and adjust as needed. Use the right polish: Choose the appropriate polish based on the condition of your car’s surface. Some polishes are suitable for removing minor scratches and oxidation, while other, stronger polishes are suitable for more serious problems. Follow product instructions and perform appropriate testing to ensure that the polish you choose will achieve the desired results. Avoid over-polishing: When polishing, avoid staying in the same spot for too long, as over-polishing can lead to thinning or damage to the paint surface. Keep the polisher moving and rotating to ensure that the entire car body surface is treated evenly.